Jump to content
Corsair Community

I think my pump broke


albeeeezy

Recommended Posts

I opened my case to do some rewiring.Open the pc. I removed a few of those power things and arranged them so they were hid behind the back of my case. Im not sure what I did, but when I powered my nautilus back on... the pump wasnt pushing the water fast like it usually does..

 

 

 

Any ideals?

Link to comment
Share on other sites

If the pump is working but it does not appear to be pushing water a fast as before you put your hands in the case I would first suspect that you may have kinked a water line inside the case. Double check the water lines for kinking or bends that are too tight and starting to collapse the line. Also, double check that the power connector is firmly seated in the connector you are using from the power supply. You might want to try another connector from the power supply.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...