evil snail Posted September 7, 2006 Share Posted September 7, 2006 i need help overclocking a biostar Gforce 6100-M9 motherboard. I have got 1GB corsair XMS DDR 400 (2X512) 3200. Any help would bw appreciated Thanks Link to comment Share on other sites More sharing options...
Wired Posted September 7, 2006 Share Posted September 7, 2006 What's the exact part number of your memory? How To Read the Memory Label Also, if you'd like I can move this down to Corsair's Enthusiast Corner if you wish. Link to comment Share on other sites More sharing options...
evil snail Posted September 10, 2006 Author Share Posted September 10, 2006 MY part number is 2 X CMX512-3200C2 Link to comment Share on other sites More sharing options...
evil snail Posted September 18, 2006 Author Share Posted September 18, 2006 can anyone help or what? Link to comment Share on other sites More sharing options...
confucier Posted September 28, 2006 Share Posted September 28, 2006 Try and test for the max frequency first. Run the 3200C2s at Cas 3 speeds: DDR Voltage: 2.8v CPU Voltage: 1.45v-1.5v (if temps are high shy down a little, should not idle higher than 48c) DDR Frequency: 200MHZ CPU Frequency: do 5MHZ incretement should easily do 220MHZ so start from there CPU Multiplier: 10x HTT: 3x or 600MHZ Dram timings TCL: 3 TRCD: 4 TRP: 4 TRAS: 8 TRC: 12 TRFC: 16 Command RAte: 2T Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.