Jump to content
Corsair Community

bad memory mojo


go.trism

Recommended Posts

Hey all - got a pair of CMX512-3200C2PT moduoles in my system, came home the other day to BSoD. Restart and all I get is BIOS beeps coded as DRAM error. Tried mem in another computer - no good; tried known good mem from other computer in my system and that is why I can make this post. Please advise.
Link to comment
Share on other sites

  • Corsair Employees
Please load setup/optimized defaults and then set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS3200 Cass 3-3-3-8 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...