Jump to content
Corsair Community

Capacity problem with corsar and samsung memory


Yanick

Recommended Posts

Hi,

 

I have installed a vs2gbkit400c3 on a fujitsu siemens scaleo Tix 54001.

This computer is working with two dual samsung memory (2*1Go).

 

I try corsair only, my bios recognyse 2Go of memory.

 

When I install the samsung and the corsair memory, there is only 3,2Go of memory in the bios information.

 

Is there a compatibility or a configuration problem ?

Please keep cool with technical word, i'm a poor french guy.

 

Thanks.

Link to comment
Share on other sites

I try with memtest, found no errors with the four memories, with corsair only and samsung only.

 

I decide to change the corsair memory with my vendors and take hynix or samsung component to preserve the stability of my computer.

 

Thanks

Link to comment
Share on other sites

When I install the samsung and the corsair memory, there is only 3,2Go of memory in the bios information.

 

That is likely because your motherboard reserves the upper registers of memory for hardware PCI interrupts if you install 4GB of memory. Therefore, you will have the very same problem (BIOS detecting only 3.2GB of memory with 4GB of installed memory) regardless of whichever brand of memory modules you choose.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...