Jump to content
Corsair Community

Should I worry?


ttn0001

Recommended Posts

I built a new system with TWIN2X2048-5400C4 kit (4-4-4-12) (2 x 1GB) memory. The timing values are incorrect and showing 4-5-5-18, not right. I have a Gigabyte GA-M55SLI-S4 motherboard with a AMD 3800 X2 cpu. The SPD values for each module does not match either. I tried increasing the DDR voltage from 0.1 - 0.3v, but no difference. The timing is showing dual channel 335 which seems to be running ok. Ran memtest for 12 hours without any problems. Should I send these memory modules back to zzf for a replacement?

timing.bmp

spd1.bmp

spd2.bmp

Link to comment
Share on other sites

I tried that but the BIOS is still limited and does not have any option to change memory settings. I even upgraded to the latest bios from manf. I did a little research on gigabyte's website and this memory is compatible with mb. Any more suggestion?
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...