Jump to content
Corsair Community

Help Please


Azeem

Recommended Posts

Hello to everyone, I'm Francesco from Italy.

I think I have a problem with my corsair memories;

 

when i shut down the internet connection a system error appear:

 

FRIVER_IRQL_NOT_LESS_OR_EQUAL

 

***STOP: 0x000000D1 (0x26919055, 0x00000002, 0x00000001, 0x84B30000)

 

Now, a friend of mine told me that it can be a problem of driver's compatibility, or a RAM problem..

 

I downloaded from the official site the software Memtest86+ v1.65 and I run it; It discovered an error:

 

Test 6 MOVING INVERSIONS, 32 BIT PATTERN

--------------------------------------------

 

TST 6

PASS 1

FAILING ADDRESS 00035e00978 - 862.0MB

GOOD ffffffdf

BAD ffffffd7

ERR-BITS 00000008

COUNT 2

 

BADRAM = 0x35e00978, 0xfffffffc

 

 

 

 

Can you help me to understand these numbers? Have I got a damaged memory?

 

Sorry for my bad english, I hope you can help me..

Thank you

Francesco

Link to comment
Share on other sites

  • Corsair Employees

Please install the modules in slots 2-3 and then go to Bios setup and load setup defaults and set these settings:

System Performance: User Define

CPU Freq: 166 MHz

Memory Frequency: 100%

Dim Voltage to 2.7 Volts

Resulting Frequency: 166 MHz

Memory timings: Manual

Would results in these settings

SDRAM CAS Latency: 2.0T

SDRAM RAS to CAS Delay (tRCD): 3T

SDRAM Row Precharge (tRP): 2T

SDRAM Active to Precharge Delay (tRAS): 6T

Graphics Aperture Size is 128 MB

Then please test the system with http://www.memtest.org to be sure its stable.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...