Jump to content
Corsair Community

defect ramstic


Himmels

Recommended Posts

I have 2 Corsair CMX512-3200LL

 

when i install a programm (from cd or hartddisk) i become an error.

then i test the mamory with a dos-tool what a support from one program me send.

on one it show me that 1 MB is defect.

 

i´m from germany, so where must i send the stic, in the usa?

and is the number 0337044 the Module Quantity???

and sorry for my broken english :)

Link to comment
Share on other sites

  • Corsair Employees
Can you tell the make and model of MB you have along with the CPU speed and it’s FSB as well? In addition, please tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set?
Link to comment
Share on other sites

  • Corsair Employees

Please set these settings and then please test the system with http://www.memtest.org.

CPU Freq: 166 MHz

Memory Frequency: 100%

Dim Voltage to 2.7 Volts

Resulting Frequency: 166 MHz

Memory timings: Manual

Would results in these settings

SDRAM CAS Latency: 2.0T

SDRAM RAS to CAS Delay (tRCD): 3T

SDRAM Row Precharge (tRP): 2T

SDRAM Active to Precharge Delay (tRAS): 6T

Graphics Aperture Size is 128 MB

If you get errors please test the modules one at a time to make sure one is not failing.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...