Athlona Posted August 15, 2006 Share Posted August 15, 2006 Hi Just got my new Intel Conroe E6600 - Asus P5W DH / Corsair 8500 cas5 memory trying to get a stable 1:1, with CPU and RAM @ 1066 but pc locks up entering into windows please can someone tell me what the problem is likely to be?:[pouts: I guess it maybe some BIOS setting that i am missing?:!: Also trying to overclock the processor to 350 FSB but can't get stable so high any ideas would be greatful?:laughing: I can get the pc stable @ 333x9 = 3ghz fine but still not @ 1:1. Thanks:sunglasse Link to comment Share on other sites More sharing options...
SpDFrek Posted August 16, 2006 Share Posted August 16, 2006 Any reason you want 1:1? Problem is you will not get your FSB up high enough for a 1:1 with that board or any other Intel board for that matter. You would have to hit 533 FSB to hit your 1:1 mark. Your better off with 2:3 or other ratio with the combination that you have. Both of the P5W DH's that I had a chance to try to OC didnt even make it to your 333, more like 315 and 320. The same CPU and memory I have in my current P5B will do 385 FSB/1155 memory stable. Link to comment Share on other sites More sharing options...
Athlona Posted August 18, 2006 Author Share Posted August 18, 2006 Got pc @ 3.6 seemed to be stable until i started to try to play a game EQ2 after 10mins pc turned itself off...:[pouts: PC Bios Setting: Max Stable OC 3.6GHz (400 x 9). CPU @ 1.65v, RAM@800mhz 1:1:sunglasse 2.25v, vmch at 1.6, FSB at 1.4v. No mods E6600 P5W DH Deluxe bios 1101 Everything in the bios is set to auto except the following: Configure System Freq/Volts CPU Freq: 400 DRAM Freq: DDR2-800 Performace Mode: Standard PCI-E Freq: 101 PCI Clock Sync: 33.3MHz Memory Volts: 2.25 vCore: 1.65 Advanced Chipset Settings Configure DRAM Timing by SPD: Manual DRAM CAS#: 5 DRAM RAS# Precharge: 5 DRAM RAS# to CAS# Delay: 5 DRAM RAS# Activate to Precharge: 15 DRAM Write Recovery: 2 Hyper Path 3: Disabled DRAM Throttling Threshold: Disabled also tried DRAM timings set to AUTO still not 100% Stable:!: please can anyone list there 100% stable settings please? Intel Conroe E6600 @ 3ghz 333x9 1.4v, Vapochill LS, ASUS P5W DH Deluxe 1101Bios, Corsair 8500 2gb Cas5/5/5/15/2 2.2v, Crossfire 1900XTmaster & 1900XTX, SoundBlaster X-Fi, Raptor x2Raid0 150gb HDD, Tagan 900Watt PSU. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 18, 2006 Corsair Employees Share Posted August 18, 2006 I would try and drop the CPU Multiplier down to 5 or 6 and see if its stable. Link to comment Share on other sites More sharing options...
Athlona Posted August 18, 2006 Author Share Posted August 18, 2006 the multiplier is locked @ 9 can it be done by software overclocking? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 18, 2006 Corsair Employees Share Posted August 18, 2006 I would maybe try and increase the CPU VCore and or lower the CPU Freq and see where the errors stop. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.