SandLake Posted August 13, 2006 Share Posted August 13, 2006 I have just bought the same board and have also bought 1 Gb Corsair TWINX2X10246400 DDR2 memory and the PC is acting strange, PC freezes after a few minutes, keyboard doen't seem to work. Trying to track down the issue, Is the memory compatible with the board? I realise I should have checked this previously. Thanks Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 15, 2006 Corsair Employees Share Posted August 15, 2006 Please load setup/optimized defaults and then set the Dim Voltage to 2.1 volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.