lazerin Posted August 7, 2006 Share Posted August 7, 2006 I was hoping someone could tell me what the settings should be to run my two sticks of VS512MB400 in dual channel on the Asrock 939dual-sata2 motherboard? My settings at the moment are: Commad rate 2T (can I use 1T?) Bank interleaving - enabled Cas - 2.5 Tras - 8 Trp 3 Trcd 3 And voltage on dram voltage on High. All the other settings on default/auto. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 7, 2006 Corsair Employees Share Posted August 7, 2006 Command Rate is not really a memory setting and would be dependant on the make and model of MB and PSU and the specific CPU you have installed. You might look this setting up on http://www.rojakpot.com and get a better explanation. But I would just test the system to be sure its stable. Link to comment Share on other sites More sharing options...
lazerin Posted August 8, 2006 Author Share Posted August 8, 2006 Thanks for the reply. I'll look up command rate and see what it does. How about my current ram settings? Are they okay? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 8, 2006 Corsair Employees Share Posted August 8, 2006 Yes and set the memory voltage to high! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.