Jump to content
Corsair Community

ASUS M2N32-SLI Deluxe and TWIN2X2048-6400C4 compatibility


Recommended Posts



I've just put together a new system which I can't get to work. It keeps coming up with a "blue screen" as it's booting into XP.


I've tried an old graphics card in case it was the new Radeon X1900 XT but makes no difference.


Could it be the motherboard/memory combination?


- ASUS M2N32-SLI Deluxe

- TWIN2X2048-6400C4 (2 x 1GB sticks)


Bios has everything as standard (auto).

Processor is a FX62

Power supply is Enermax 485w Noisetaker


Anybody got any ideas?



Link to comment
Share on other sites

  • Corsair Employees
Please install the latest bios and then load setup/optimized defaults and then set the Dim Voltage to 2.1 volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XM2S6400C4 Cass 4-4-4-12 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

  • 2 weeks later...


This topic is now archived and is closed to further replies.

  • Create New...