Jump to content
Corsair Community

Asus m2n-e and vs2gbkit667d2 issues


aneks

Recommended Posts

Hi,

 

I had a look on the corsair site and I can see that this configuration is supported. But I am having a problem with my brand new system. Basically I can get the system to boot windows with the ram in Slots 1&2. (single channel) but not with Ram in Slots 1 and 3 (Dual Channel) second config won't even boot in safe mode.

 

My System specs. (All standard no OC'ing)

 

Asus m2n-e

AM2 x2 3800+

vs2gbkit667d2 2x 1gb 5300

Gigabyte Geforce 7950

2x Seagate 320gb 7200.10 RAID0

Antec 550w PS

Antec P180

Onboard LAN and audio

 

Thanks,

 

t.

Link to comment
Share on other sites

  • Corsair Employees
Please get the latest bios and then load setup/optimized defaults and then set the Dim Voltage to 2.1 volts (+.2 Volts W/Giga-Byte) and leave the timings set to "BY SPD" and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...