JIM2003 Posted July 14, 2006 Share Posted July 14, 2006 I bought your TWINX2048-3200 and I have been having corruption when copying files. I ran memtest for 8 hours, and I got 102 errors, and 9 passes. Should I RMA them? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted July 14, 2006 Corsair Employees Share Posted July 14, 2006 Can you tell me the CPU speed and it’s FSB as well? In addition, please tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set? Link to comment Share on other sites More sharing options...
JIM2003 Posted July 14, 2006 Author Share Posted July 14, 2006 I have an Intel Pentium 4 3.0E "Prescott" 800mhz FSB. All my CPU/RAM BIOS settings are at default settings. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted July 14, 2006 Corsair Employees Share Posted July 14, 2006 Please load setup/optimized defaults and then set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS3200 Cass 3-3-3-8 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.