azureseed Posted July 11, 2006 Share Posted July 11, 2006 After independent testing of the pair of modules in question (memtest86 v3.2, newest build), many errors have been found. My current settings are: Tcl: 2.5 Tras: 7T Trcd: 3T Trp: 3T Trc: 12T These settings were recommended the last time I had posted here for an RMA. System Specs CPU: Athlon 64 3800+ Mobo: ASUS A8N-E PSU: Antec TruePower 2.0 480W RAM: 4x CMX512-3200C2PT (1 pair tested OK) Please advise. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted July 11, 2006 Corsair Employees Share Posted July 11, 2006 Please load setup/optimized defaults and then set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.