Jump to content
Corsair Community

What Happenned???


kuantou

Recommended Posts

Man, i guess you can see my system in my profile, right? Well, I had a hard labor to get my machine to work. But, i don´t know why it didn´t install directly Windows Vista Beta from DVD nor an upgrade from windows XP could run. It says windows 32 not compatible program or something. Altough it ran just fine in my old athlon 1.1, Asus A8V, 512MB generic memory.... I´m confused and disappointed. But the REAL problem is: In the second day the machine didn´t work. It turned on but have no video signal. I tried many things, then i saw it couldn´t work with 2 RAM modules, only one... And then one just stopped to work definetely. I am working only with 1GB. It´s so sad. And i don´t know what happend but meanwhile, some other thing happen...the windows didn´t boot! I ran Norton Ghost, identified the HD, then it´s working just fine. After a long road of testings, it´s working with 1GB. But I still don´t know what happend to the module and don´t know why it doesn´t run Windows Vista Beta installer. Just to know, i didn´t do anything wrong, installed modules on green slots only, didn´t try any overclocking or something... Well, if someone could help me, i thank you!
Link to comment
Share on other sites

  • Corsair Employees
Please load setup/optimized defaults and then set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS3200 Cass 3-3-3-8 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...