Jump to content
Corsair Community

I need an RMA number


Recommended Posts

I have 2 1GB kits of Corsairs VS PC3200. 1 kit (2 x 512MB) has developed errors within 5 minutes of running MemTest x86 v1.65. I need to RMA this kit to get them replaced, they aren't even a year old, I would say maybe 8 months at max.

 

Any help would be appreciated...Thanks

Link to comment
Share on other sites

  • Corsair Employees
Please load setup/optimized defaults and then set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

  • 2 weeks later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...