RossDagley Posted July 5, 2006 Share Posted July 5, 2006 Hi System will be 3200+ barton (socket A) in an NF7-S. This system has already ran overclocked to over 2750mhz on the first lot of ram listed below. I'm building the same system again, and I've got two lots of ram. Given that I'm going to be overclocking to high levels, which of the following (I own both) is better to use in the above system? 1. Pair of TwinX CMX512-3200C2 (v1.2) 2. Pair of TwinX CMX512-4400C25 (revision unknown) Thanks! Link to comment Share on other sites More sharing options...
RossDagley Posted July 5, 2006 Author Share Posted July 5, 2006 I may have answered this myself as according to the "corsair configurator": Recommended Modules Most Popular:TWINX1024-3200C2 / DDR-400 (XMS-3200C2) / 2-3-3-6 Best Overclocking:TWINX1024-4400C25 / DDR-550 (XMS-4400C25) / 2.5-4-4-8 Lowest Latency:TWINX1024-3200XL / DDR-400 (XMS-3200XL) / 2-2-2-5 I've got the most popular, and the best overclocking. I just need to know whether the "best overclocking" is gonna be better than the best overclock I've had from my 3200C2 ;) HELP! Link to comment Share on other sites More sharing options...
Wired Posted July 5, 2006 Share Posted July 5, 2006 4400C25 of course, as it's rated @ 275 Mhz. Link to comment Share on other sites More sharing options...
RossDagley Posted July 6, 2006 Author Share Posted July 6, 2006 Thanks dude :) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.