Jump to content
Corsair Community

2 Sets of Bad Memory (TWINX2048-3200PT)


ddalton

Recommended Posts

My company purchased about 2 dozen+ sets of TWINX2048-3200PT. We noticed problems with two of our computers (Shuttle, SS/B5G2). We ran different tests and after running Memtest86 on each Memory Stick we found that each stick had different memory errors.

 

No sure what course of action we need to take to get them replaced.

Website said to come here. Please Advise.

 

Thanks.

Link to comment
Share on other sites

  • Corsair Employees
Please load setup/optimized defaults and then set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...