Jump to content
Corsair Community

spontaneous reboots: help, help, help!


Recommended Posts

I am getting constant spontaneous reboots, all with more or less the following message:


The bugcheck was: 0x 1000008e (0x8000003. 0x86ea01c. 0xb9f98b98. 0x00000000)

Another: 0x100007f (0x0000000d. 0x00000000. 0x00000000. 0x00000000)


They all follow similar pattern although no two are the same?


The system:


Corsair TWINX1024-3200XLPT

Amd x2 3800+

Asus a8n sli premium

Gigabyte 6800 gs

Pc Power and Cooling 510 sli


Plextor DVD

2 samsung 125 pata

1 maxtor 250 sata


Am I right to suspect the memory? Or the CPU (memory controller is on the CPU)?


Any suggestions?

Link to comment
Share on other sites

  • Corsair Employees
Please load setup/optimized defaults and then set the Dim Voltage to 2.8 volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...