MegaNega Posted June 22, 2006 Share Posted June 22, 2006 Could Someone please tell me more about the "Quick connect self sealing connectors". What I'm really interested in is when you disconnect the hoses from the component that cools the coolant thats outside the computer case do the hoses leak any coolant? Link to comment Share on other sites More sharing options...
Wired Posted June 22, 2006 Share Posted June 22, 2006 only a drop or two I think Link to comment Share on other sites More sharing options...
boogieman Posted June 22, 2006 Share Posted June 22, 2006 As I recall the connectors are a spring loaded valve. The valve (check type) is forced open when connected and spring closed when disconnected. Very little fluid comes out when disconnected. Link to comment Share on other sites More sharing options...
MegaNega Posted June 22, 2006 Author Share Posted June 22, 2006 Thanks for your quick replies!:): Link to comment Share on other sites More sharing options...
stev Posted June 22, 2006 Share Posted June 22, 2006 As I recall the connectors are a spring loaded valve. The valve (check type) is forced open when connected and spring closed when disconnected. Very little fluid comes out when disconnected. That is right! :biggrin: Here's the company that manufactures the product. http://www.colder.com/asp_main/default.asp They have world wide rights and patents on this technology. Link to comment Share on other sites More sharing options...
Elof Posted June 24, 2006 Share Posted June 24, 2006 You get a few ml of fluid id recomend some paper towel under it when you do it , i move mine a fair bit , i just let the leaked stuff drain and top it up every now and then with distiled water Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.