caldas Posted June 20, 2006 Share Posted June 20, 2006 Hello guys, I don´t know how set correct my memory in bios, this is Corsair Twinx2048 3200c2pt ver 2.1 In bios have alot of configs but I set all AUTO becaus I don´t know this optrions, I think that this memory is BH-6 chip. Someone can help me ? :( CAS 2 TRAS 3 TRP 3 Right? And about this ? TRCD xxxx TRRD xxxx TRC xxxx TRFC xxxx TRWT xxxx ? :( ps: The system are stock speed, no over. Link to comment Share on other sites More sharing options...
billb Posted June 20, 2006 Share Posted June 20, 2006 You could look here: http://www.xtremesystems.org/forums/showthread.php?t=80491 Link to comment Share on other sites More sharing options...
Wired Posted June 20, 2006 Share Posted June 20, 2006 Corsair XMS Qualification and Testing Information CAS Latency (tCL): 2 RAS to CAS Delay (tRCD): 3 Row Precharge (tRP): 3 Active to Precharge Delay (tRAS): 6 Memory Voltage: 2.75 Volts All other settings to defaults. Link to comment Share on other sites More sharing options...
caldas Posted June 21, 2006 Author Share Posted June 21, 2006 Corsair XMS Qualification and Testing Information Memory Voltage: 2.75 Volts All other settings to defaults. Default that you say is: TRCD TRRD TRC TRFC TRWT Set AUTO ? :confused: Link to comment Share on other sites More sharing options...
Wired Posted June 21, 2006 Share Posted June 21, 2006 Correctamundo. Link to comment Share on other sites More sharing options...
caldas Posted June 22, 2006 Author Share Posted June 22, 2006 Ookye, thanks for reply. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.