Jump to content
Corsair Community

Problem with CMX3200C2


Recommended Posts

Hello,

I have to buy 2*XMS-PC 3200C2. But my computer don't want boot.I have test my modules separatly and its one of memory that don't work.

Modules 1 = CMX512-3200C2 XMS3202v4.3 0532013-1 ==> Work

Modules 2 = CMX512-3200C2 XMS3202v5.2 0532079-1 ==> don't Work

 

I try 2.7 and more but don't work again.

I try timing 2.5/3/3/6 and more but don't work.

 

Plz help me!!!:[pouts:

 

(sorry for my english but i'm french guy:sigh!: )

Link to comment
Share on other sites

  • Corsair Employees
I am sorry but you cannot mix memory with this platform, Please load setup/optimized defaults and then set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...