Jump to content
Corsair Community

Ram + MemTest = PB


Recommended Posts

1. Please do not bump a thread within 24 hours. It doesn't help, nor is it fair to others.

 

2. More info is needed than a simple screenshot.

 

What CPU / FSB / Motherboard do you have?

 

What is the exact part # and revision # of each stick? Is it a TwinX pack?

How To Read the Memory Label

 

Click here to find out how you can add your system specs to your profile and posts!

 

What voltage are you testing the memory at? Test one stick at a time in each slot.

Link to comment
Share on other sites

1. Please do not bump a thread within 24 hours. It doesn't help, nor is it fair to others.

 

Sorry fo my impatience

 

2. More info is needed than a simple screenshot.

What CPU / FSB / Motherboard do you have?

 

AMD Athlon 64 3500+

FSB : 200mhz

Shuttle SN25P whit motheboard FN25

 

What is the exact part # and revision # of each stick? Is it a TwinX pack?

How To Read the Memory Label

 

It's a TwinX pack

CMX512-3200C2 XMS3202v5.2

0546123-0

XMS3200 512MB 400Mhz CL2

 

Click here to find out how you can add your system specs to your profile and posts!

 

ok

 

What voltage are you testing the memory at? Test one stick at a time in each slot.

 

I Tested with a voltage at 2.8v

 

The same error with each one memory

 

 

(Sorry for my english i am french i don't speack english very well)

Link to comment
Share on other sites

  • Corsair Employee
Please make sure that you have the latest bios and then load setup/optimized defaults and then set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...