P4C800-E Deluxe / Twinx 2048-3200

[cpupro]

I received this memory, matched set the other day that didn't work for the MB that I bought it for. Instead I am using this on my main MB Asus. I am a little confused on the settings to get the ultimate performance from this.

 

My settings are:

CAS# Latency - 2.0

RAS# Precharge - 3

RAS# to CAS# Delay - 3

Precharge Delay - 6

Burst Length - 4

DDR Reference Voltage - Auto

Performance Mode - Auto

 

I want the best performance from this memory and MB and need suggestions on doing that. Do I use the overclock AI or is it better to tweak the individual settings?

I am not a big gamer but do photo editing and so forth need the speed as they say.

**As stated by the Ram Guy in another area it is stated that these are my settings the only difference is that I can't change the voltage when I do the machine hangs on this unit.**

 

TWINX3200C2

TWINX2048-3200C2 Data Sheet

TWINX1024-3200C2 Data Sheet

TWINX512-3200C2 Data Sheet

Motherboard make and model: Asus P4C800/-E and/or DFI INFINITY I865/I875 and/or Asus A7N8X and/or ABIT IC7 Max3.

Each pair is tested and packaged together using the following settings:

DRAM Clock: 200 MHz

DRAM Voltage: 2.7X Volts

SDRAM CAS Latency: 2T (2.5 on AMD platform)

SDRAM RAS to CAS Delay (tRCD): 3T

SDRAM Row Precharge (tRP): 3T

SDRAM Active to Precharge Delay (tRAS): 6T

SDRAM Bank Interleave: 4 Bank

All other settings are motherboard defaults.

[Wired]

tweak the individual settings when overclocking

[cpupro]

What are the voltage settings I can only get to AUTO, what am I missing in the BIOS?

[RAM GUY]

Please make sure you have adjusted the DDR Voltage to the required 2.75v.