Jump to content
Corsair Community

Please Help


Tranquility

Recommended Posts

Hello All,

I have problem with my new ram Corsair (2*512 Ddr 400) .

I have motherboard - Gigabyte k7 Triton Ga-7n400 pro 2

1, After few minutes that Pc works my screen display( monitor) will drop and the whole monitor is black only one rectangle is moving there with error "Cannot Display this Video Mode 1280*1024 60 Hz" PLZ DO you know How can i get rid of this error??? PLEASE PLEASe

Thanks & Best Regards

Link to comment
Share on other sites

  • Corsair Employees

Please load setup defaults in your bios setup and then set these settings:

CPU Freq: 166 MHz

System Performance: User Define

Memory Frequency: 100%

Dim Voltage to 2.7 Volts (+.2 Volts W/Giga-Byte)

Resulting Frequency: 166MHz

Memory Timings: Manual/User Define

SDRAM CAS Latency: 2.5T

SDRAM RAS to CAS Delay (tRCD): 3T

SDRAM Row Precharge (tRP): 3T

SDRAM Active to Precharge Delay (tRAS): 7T

Then test the system with http://www.memtest.org to make sure its stable.

Link to comment
Share on other sites

First i would really like to thank you for helping me to solve this problem.

 

1 , That advice was great ,but i have problem that my bios doesnt contain these things.....like

Dim Voltage to 2.7 Volts (+.2 Volts W/Giga-Byte)

SDRAM CAS Latency: 2.5T

SDRAM RAS to CAS Delay (tRCD): 3T

SDRAM Row Precharge (tRP): 3T

SDRAM Active to Precharge Delay (tRAS): 7T

2 , Here is my Display screen what my Bios contains.http://img462.imageshack.us/img462/7533/10505525vy.jpg

If you could help me where can I find these options I would be really thankful.

THANKS VERY MUCH

Link to comment
Share on other sites

  • Corsair Employees
Please call our Tech Support at 1-800-205-7657 when you are in front of your system and we can try and help you solve the problem. Our hours are from 8:30 AM to 5:30 PM Pacific Time Monday thru Friday excluding holidays.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...