Jump to content
Corsair Community

Corsair (VS1GBKIT400) 1024MB (2 x 512MB Matched Pair), DDR400 / PC3200,


widndr

Recommended Posts

Purchased through ebuyer, worked fine until last week, the wouldn't boot at all. Traced back to one of the sticks which when removed will allow boot up and normal working. Don't think it's a bios issue, but any help would be useful.

 

Regds

Dave

Link to comment
Share on other sites

  • Corsair Employees
Please load setup/optimized defaults and then set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...