Jump to content
Corsair Community

MSI K8NGM2-FID and TWINX2048-3200


Recommended Posts

System POSTs fine, but memtest86 fails. Tried setting voltage to 2.7V as recommended here:


but situation did not improve.


I have tried with one stick (both sticks), and with two. But memtest still fails. I have also used the settings from this page:


in the BIOS, although the "Bank Interleaving" setting is only available as "Auto" or "Disabled".


This RAM is listed as compatible, so I'm assuming its a settings problem. Current BIOS is 2.96, CPU is AMD Athlon 64 3200+ Venice, socket 939

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...