xyoshix Posted May 16, 2006 Share Posted May 16, 2006 What is the best timing for twinx512-4000PT and Abit AI7 P4 2.8Ghz Thank You Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted May 16, 2006 Corsair Employees Share Posted May 16, 2006 Cas 3-3-3-8 at DDR400 at 2.75 Volts would be what I would suggest with that MB to start with, and if you over clock, you should set the timings to Cas 3-4-4-8. Link to comment Share on other sites More sharing options...
xyoshix Posted May 17, 2006 Author Share Posted May 17, 2006 Thanks for your reply. However I cannot set it to 2.75v, so i choose 2.7v and run memtest32 for 6 hours without any error. Btw my ram is running on 460Mhz now.:biggrin: Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted May 18, 2006 Corsair Employees Share Posted May 18, 2006 Thats good then please let me know if you have any more questions! Link to comment Share on other sites More sharing options...
xyoshix Posted May 19, 2006 Author Share Posted May 19, 2006 1 more question. Can i know what is my ram chipset? Stated there xms4000v3.1. Link to comment Share on other sites More sharing options...
Wired Posted May 19, 2006 Share Posted May 19, 2006 1 more question. Can i know what is my ram chipset? Stated there xms4000v3.1. http://www.houseofhelp.com/v2/showthread.php?t=44365 READ THE FIRST POST there, then post in there to get an answer as to which ICs your memory uses. Link to comment Share on other sites More sharing options...
xyoshix Posted May 19, 2006 Author Share Posted May 19, 2006 ok. Thank you. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.