Jump to content
Corsair Community

bad 3200XL PRO


Recommended Posts

Hi

 

here is the situation, I bought two sticks 3200XL PROs 2-2-2-5,they were working fine till now,I tested them seperately and one of the sticks shows errors when cas is set to 2.5 and everything else on default,is this fault or not cause I am having trouble with reseller how is claiming that this is ok,that stick is not faulty?! please I need help

Link to comment
Share on other sites

  • Corsair Employees
Please load setup/optimized defaults and then set the Dim Voltage to 2.8 volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-2-2-5 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...