vegas16lax Posted May 3, 2006 Share Posted May 3, 2006 I have a bad module. Tested it with MemTest to confirm. Need an ticket# in order to proceed with filling out the RMA request form. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted May 3, 2006 Corsair Employees Share Posted May 3, 2006 Can you tell me our modules part# (How To Read the Memory Label) and the CPU speed and it’s FSB as well? In addition, please tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set? Link to comment Share on other sites More sharing options...
vegas16lax Posted May 3, 2006 Author Share Posted May 3, 2006 This is all of the info from the module: XMS3202v2.2 0601003-2 CMX1024-3200C2 CPU speed AMD 4400+ = 2.2Ghz FSB = 400Mhz I think...can't be sure There are no special performance settings. Chip went bad. Tested with MemTest Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted May 3, 2006 Corsair Employees Share Posted May 3, 2006 Please load setup/optimized defaults and then set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. Link to comment Share on other sites More sharing options...
vegas16lax Posted May 4, 2006 Author Share Posted May 4, 2006 I tested the modules in another pc with the same motherboard. Same problem. This module is dead. RMA please. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted May 4, 2006 Corsair Employees Share Posted May 4, 2006 Let's get it or them replaced, please use the On Line RMA Request Form and we will be happy to replace them or it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.