Jump to content
Corsair Community

2GB dual channel corsair xms DDR400 pc3200 failed memtest


Hadok3n

Recommended Posts

2x CMX1024-3200C2 (dual channel kit), running at 2-3-3-6 timings at 2.75v, i used the microsoft memtest and it failed every single test, reseated them, failed, moved em to diff DIMM slots, failed... x_x hellppppp meeee...
Link to comment
Share on other sites

  • Corsair Employees
Please load setup/optimized defaults and then set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...