ebasol1 Posted April 25, 2006 Share Posted April 25, 2006 Hello, I have this 2 GB pair and have been having problems recently. Originally, i had the memory set at 2-3-3-6-1T @ 2.75V @ 200MHz running fine (passing memtest for 12 hrs) in dual channel mode. Then problems started appearing, so i tested the modules one-by-one in all of the memory slots on my MB using memtest. One of the modules generates errors every 3 seconds or so consistently, and the other passes fine. It looks to me like one of my modules is bad. I also retested at lax timings ("Auto" in BIOS) and at 2.65V, with the same results. My specs are below: x2 3800+ @ stock EVGA NF41 SLI MB 620W Enermax Liberty PSU some other stuff...let me know if you need it. Should i proceed with an RMA? Thanks Erol Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 25, 2006 Corsair Employees Share Posted April 25, 2006 Let's get it or them replaced, please use the On Line RMA Request Form and we will be happy to replace them or it. Link to comment Share on other sites More sharing options...
ebasol1 Posted April 25, 2006 Author Share Posted April 25, 2006 will i get a confirmation email? i submitted the form ~30 min ago, but haven't received confirmation that it was successfully submitted. thanks Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 25, 2006 Corsair Employees Share Posted April 25, 2006 You should get a reply with in about 24 hours, if not please call customer service at 888-222-4346 and dial "0". Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.