Jump to content
Corsair Community

Twinx1024-8000UL - P5N32-SLI Deluxe Problem


Recommended Posts



just finished installing my computer

Asus P5N32-SLI Deluxe (Latest BIOS)

INTEL D950 - 3.4Ghz

Zalman CNPS9500 Led - putted Artic Silver 5 on the CPU

Corsair TWINX1024-8000UL (2.2V)

Enermax Liberty 620W

Antec P180


the thing is from my understand if i want to run those memory on 1ghz i need to overclock the FSB to 1Ghz as well, when i'm doing it and saving the bios settings the computer turn off.


tried anything above 820mhz and it turn off or either reset without showing the screen again (need to turn off and back on)


when keeping the FSB on 800mhz i then trying just to play with the memory bus and the highest setting i could reach is 933 - above it the network card don't speak with anything and really above like about 970 or something computer crash, not starting up, turn off.


putted the overclock on Manual

memory voltage on 2.2 - all the rest on Auto

Cas - 5

Trcd - 4

Trp - 4

Tras - 9t

the other 2 on auto (like your site saying)


i'm getting on Sandra 2005 "5083" on the memory bandwidth test


just wanted to know - there is something i could do to push the memory higher? from the reviews i seen the labs getting even 7000 on Sandra.

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...