Jump to content
Corsair Community

Boot Disk Error


Recommended Posts

I am having problems with my computer. I found out that my motherboard was bad and have purchased a new one. I am trying to install Windows on a brand new HDD and I get through the install and start installing my drivers. After rebooting my computer gets stuck at the Windows splash screen. After rebooting again, I am getting a boot disk error. I have tried this on 2 motherboards and with different hard drived. After consulting a PC tech, he advised me that my RAM was more then likely the cause of my problem.
Link to comment
Share on other sites

  • Corsair Employees
Please load setup/optimized defaults and then set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...