Jump to content
Corsair Community

vs521mb400 1024mb pack issues.


Recommended Posts

Ram Guy,

 

I have a VS512MB400 dual channel 1024mb kit that was purchased 2/18/06.

 

It was purchased for my sons computer, and has always been run at stock timings and voltages. I had quite a bit of trouble loading OS, many BSOD's (0x00000021a and 0x00000050). Thinking something was amiss, I even swapped the motherboard, processor, and video card thinking there was some issues with one of them since this was such new memory.

 

I finally ran memtest86+, and was shocked to see only 2 of 5 tests pass, with errors numbering upwards of 500000 in a 2 hour time period!!! The result is the same no matter which motherboard I try the memory in.

 

Can I get these modules replaced?

Link to comment
Share on other sites

After following a few other threads, I noticed that there was a recommendation to change the dram voltage to 2.7. This did not change the errors output when testing with memtest-86 v3.2. Please advise on what other course of action should be taken or if I should see about an RMA for these modules.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...