uberclops Posted April 6, 2006 Share Posted April 6, 2006 Hi, i've been having problems with my timings on this motherboard. I set my timings to 2-3-3-6 1T at 2.7V and my pc seems to hang at startup :( Should a BIOS update help with this problem? Link to comment Share on other sites More sharing options...
Yellowbeard Posted April 6, 2006 Share Posted April 6, 2006 It may not solve the problem but the newer 1103 bios is MUCH better than the 1009. If you flash and the problems persist, please list all of your bios settings that relate to CPU, RAM, and voltages. Also, test the modules individually for 3-5 passes each with http://www.memtest86.com with the RAM voltage at 2.75v. Mike. Link to comment Share on other sites More sharing options...
uberclops Posted April 7, 2006 Author Share Posted April 7, 2006 Thanks, I updated the BIOS yesterday and found that my pc was much more stable. Will test settings today. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 7, 2006 Corsair Employees Share Posted April 7, 2006 And you PSU might not be anough for the config you gave, I would think about a bigger PSU when you can as well. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.