Jump to content
Corsair Community

Epox Mobo Setup


idsane

Recommended Posts

I have an Epox 8kraipro mobo with a via kt880 chipset. I just bought corsair twinx1024-3200c2pt memory and need help setting it up. From reading way more than I ever wanted to know about memory, I found out most of my mobo settings that need to be changed (changed to 2-3-3-6 instead of 2.5-4-4-9). However, I still do not know my command rate (currently 2T but most people have 1T ? ) or my bank interleave (currently disabled but most people have 2 bank or 4 bank?). From all that I can tell, my other settings should be left alone: Trfc (15T) and Trrd (2T) . Thanks for any and all help.
Link to comment
Share on other sites

  • Corsair Employees
You can follow the link in my signature for the tested settings and all other setting’s that are not listed should be set to Bios default. You can go to http://www.rojakpot.com and use the bios optimization guide to configure the other settings, but I would suggest testing the system with http://www.memtest.org to make sure its stable.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...