Corsair Employee RAM GUY Posted July 12, 2006 Corsair Employee Share Posted July 12, 2006 I would try and set the memory frequency at 667 Mhz and see if the system is stable. Link to comment Share on other sites More sharing options...
Wolf6sisna.com Posted July 12, 2006 Share Posted July 12, 2006 Did drop it to 667 and it is stable at 4-4-4-12-18-1T using all 4GB of mem. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted July 12, 2006 Corsair Employee Share Posted July 12, 2006 OK great news! Please let us know if you have any more questions! Link to comment Share on other sites More sharing options...
aziphrale Posted October 12, 2006 Share Posted October 12, 2006 I am also having this issue. I have this mobo and an x6800 processer and with this memory its not booting up. I have replaced the memormy with a kingston gig and it works. i have no issues with it booting. i dont know what to do to make it boot with this memory. i called support and no one returned my call. Will the mobo work with 800 or does it have to be 667? Can someone assist me? Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted October 12, 2006 Corsair Employee Share Posted October 12, 2006 This MB will only support DDR2-667, when you say it will not boot do you mean it will post but not let you into Windows or it will not post at all? Link to comment Share on other sites More sharing options...
aziphrale Posted October 12, 2006 Share Posted October 12, 2006 It doesnt POST at all. I did on the initial power up and doesnt at all anymore. I will try again when i get home. But i took it to a local shop and they said that even after they changed the mhz it wasnt running stable. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted October 12, 2006 Corsair Employee Share Posted October 12, 2006 Please test the modules one at a time to be sure. Link to comment Share on other sites More sharing options...
aziphrale Posted October 13, 2006 Share Posted October 13, 2006 I went home and tried each stick on its own. I got one to run the other is not running for some reason. Is it faulty. I never changed the frequency on my own. HOw do i do it? Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted October 13, 2006 Corsair Employee Share Posted October 13, 2006 If one module will work then use that module to update the bios and then load setup defaults and set the memory Voltage to 2.1 Volts and set the memory frequency to DDR667 and see if the system will post and run with both modules installed after you exit saving changes. Check your user manual in section 4 for how the make changes to your bios! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.