Jump to content
Corsair Community

CMX1024-3200 Problems


Kindarin

Recommended Posts

Soo...pretty sure I have 2 bad sticks of RAM. Computer crashed last night while playing a game, restarted and left it until this morning. Then everytime I tried to load Windows, it'd come in and then restart instantly.

 

Swapped all four of my sticks around and the only time it works is when the two I have are in there. I've swapped both the good and the bad sticks around in all four slots, and tried the two good ones in the A1/B1 and A2/B2 slots just to make sure it wasn't the motherboard's slots.

 

What shall I do now? I'm a little disappointed, I've only had this computer up and running for a month now, all parts purchased through New Egg.

Link to comment
Share on other sites

  • Corsair Employees
Please load setup/optimized defaults and then set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS3200 Cass 3-3-3-8 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...