Rutger Posted January 31, 2006 Share Posted January 31, 2006 Hi, I have an Acer 5024WLMi notebook. I've learned from Acer that this notebook only takes memory modules that run at 2.5 volt. Since PC3200 Sodimm modules can run at 2.5 or 2.6 volt, I want to know if the Corsair VS1GSDS400 modules run at 2.5 or 2.6 volt. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 31, 2006 Corsair Employees Share Posted January 31, 2006 Our DDR400 would would need the system to meet the JEDEC spec for DDR400 which is 2.6 Volts +- 1.0 Volt. But I am sure our modules will run in your system. Just dont mix them. Or I would suggest you look up your system on our memory configurator and use a module that's listed. Link to comment Share on other sites More sharing options...
Rutger Posted February 1, 2006 Author Share Posted February 1, 2006 The Acer 5024WLMi isn't listed in the memory cofigurator. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 1, 2006 Corsair Employees Share Posted February 1, 2006 Then to be sure I would suggest you use a module thats been suggested by the system builder/maker. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.