wolfsbayne Posted January 31, 2006 Share Posted January 31, 2006 I purchased this twin set from Zipzoomfly and the computer wouldn't boot with both sticks. So, I narrowed down which one was faulty and RMA'd that stick to Zipzoomfly. However, even though the system can now boot, I can't get this second stick to get to 400. I can run it at 333 and memtest completes without any errors and boots at this speed to Windows just fine, but the computer won't even boot at 400. 2.5,3,3,6 are my timings and my voltage is 2.75 and everthing else is default. It seems like this stick is bad too. Any suggestions? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 2, 2006 Corsair Employees Share Posted February 2, 2006 Let's get them both replaced. Please follow the link in my signature “I think I have a bad part! Or *New* Tech Support Express” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.