Faulty Corsair Memory

[DaveJenkins]

i think i have a fault peice of corsair value select memory, its a 512mb pc3200

 

I had this in a computer and the computer would keep restarting and would not go past the windows loading screen, it would then restart.

 

To trest this i placed the saem peice in my other computer which was working fine, now this same fault happens with my computer.

 

Is it best to replace this under the warranty - as i thinki have another peice of this memory which might be doing the same thing.

[RAM GUY]

Please set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.

[DaveJenkins]

i have run the test and it came up several times that this piece of ram had failed. so it is therefore faulty.

 

can you please reply so i can get it sent back to yourselves

 

many thanks

[RAM GUY]

If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be

 

I think maybe u missed that part of my previous post!