Jump to content
Corsair Community

588 Errors in memtest.


Kakashi

Recommended Posts

I've had this computer built since around 7/3/2005 and everything worked smoothly till last week.

I constantly got blue screens while playing Battlefield 2. I had first thought it was just my video driver so I tried a variety of nvidia drivers. The first x64 one i used, to the newest one, to the beta one, to the modified ones. I thought maybe a leftover installation was affecting it so I used drivercleaner to make sure all of nvidia was out and installed the first video driver that worked with bf2. Now bf2 wouldn't even finish loading a map. After a while it did load a map but right after it would crash with a BSOD or just to dekstop.

I thought it was many different things before I got to the ram and I was reccomended to use memtest86+. First second of the test it came up with 588 errors on I think test #2.

I went ahead and ordered another stick on newegg but I need to get this stick warrentied. Any advice?

 

 

***edit***

I just happened to have rotten luck and my system blue screens while filling out the Tech Support Express forms. Don't remember my order number and I was too stupid to write it down but I didn't get to finish it anyway. When the BSOD happened I reran memtest and here are the results. http://img.photobucket.com/albums/v642/ryukakashi/DSCF0144.jpg and http://img.photobucket.com/albums/v642/ryukakashi/DSCF0150.jpg

 

A lot more than 588 this time around.

Now I cannot even log into windows unless I'm in safe mode.

Link to comment
Share on other sites

  • Corsair Employees
Please set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...