Digital2d Posted January 26, 2006 Share Posted January 26, 2006 I had these for about a year...everything worked fine till today...wouldnt boot to windows.......so i tested the ram out in my other computers....used prime 95 and Memtest 86 and both said there are errors in the ram...i have temp ram in it now and its running fine system 480 psu abit 1c7-g mobo p4 3.0c ram xms 3200 xl pro nvidia 6800gt oc from bfg Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 26, 2006 Corsair Employees Share Posted January 26, 2006 Please set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.