groovebright Posted January 25, 2006 Share Posted January 25, 2006 I'm set on using this mATX motherboard in a mod I'm building for the first time but my lack of experience and little pea sized brain can't quite figure out what Corsair types and models are compatible with it. The board has four 240 pin DIMM sockets and supports the following memory features: • 1.8 V (only) DDR2 SDRAM DIMMs with gold-plated contacts. (Does this mean it can't be higher or lower?) • Unbuffered, single-sided or double-sided DIMMs with the following restriction: Double-sided DIMMS with x16 organization are not supported. • 4 GB maximum total system memory. (I'm starting @ 1GB) • Non-ECC DIMMs • Serial Presence Detect • DDR2 667 or DDR2 533 MHz SDRAM DIMMs ( Will it accept 675 MHz modules? ) These specs came from the Intel website and don't offer too much other info. The Voltage and Speed ratings is what stumps me most....plus I want a little bling with the performance! -Thanks for any advice offered! Link to comment Share on other sites More sharing options...
This topic is now archived and is closed to further replies.