MuskelKater Posted January 23, 2006 Share Posted January 23, 2006 i got the ram above and tried it on several pc´s and nothing works out. my machine is an abit nf7-s with an amd xp 2600 mobil, i used memtest and prime, memtest didn´t show me any error but crashes everytime at the end of test 4, prime shows errors after a few second. the other two system are abit nf7, xp 3000+ / asus a7n8x-x with my cpu and its on all systems the same. at the end i changed the memory to another brand and i worked on all systems, plz help me!!! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 23, 2006 Corsair Employees Share Posted January 23, 2006 Can you tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set? Link to comment Share on other sites More sharing options...
MuskelKater Posted January 23, 2006 Author Share Posted January 23, 2006 my test settings on all machines are: 200x11,5 2,5-3-3-11 cpu interface on i tried 2,6v and 2,7v all the same is there anything else u would like to know Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 23, 2006 Corsair Employees Share Posted January 23, 2006 Please try these settings and work your way up but lower the multiplier and relax the timings as you go up. CPU Freq: 166 MHz System Performance: User Define Memory Frequency: 100% Dim Voltage to 2.8 Volts Resulting Frequency: 166MHz Memory Timings: Manual/User Define SDRAM CAS Latency: 2T SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 2T SDRAM Active to Precharge Delay (tRAS): 5T Link to comment Share on other sites More sharing options...
MuskelKater Posted January 23, 2006 Author Share Posted January 23, 2006 i tried it at lower fsb and all timings at minimum and its the same iam honest plz help me my hole weekend was nightmare of testing. and what is the ram good for when it will not run under 200MHz even if its made for 275MHz. and i just found this on ur homepage and my ram is suggested for my board Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 23, 2006 Corsair Employees Share Posted January 23, 2006 Please try the settings I gave you and test them one at a time. Link to comment Share on other sites More sharing options...
MuskelKater Posted January 23, 2006 Author Share Posted January 23, 2006 i did as u said and used the settings u gave me for some more testing, i started at 166mhz with 3-8-8-15 timings and 2,8v(on my abit nearly 3,0v). the results are that i get nothing above 165mhz memtest or primestable, no matter at wich timings 2-3-3-5 / 2,5-3-3-11 / 3-8-8-15. if i tried to set te fsb at 200 it was very hard to get windows to boot, bluescreens everywhere. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 23, 2006 Corsair Employees Share Posted January 23, 2006 That might suggest your CPU is just topping out! Link to comment Share on other sites More sharing options...
MuskelKater Posted January 23, 2006 Author Share Posted January 23, 2006 i dont think so, because if i run my system with same config with my other ram its all fine, could not be my cpu. i visit a friend today and test the memory on his pc, he could not even boot with the corsair ram. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 23, 2006 Corsair Employees Share Posted January 23, 2006 Let's get them both replaced. Please follow the link in my signature “I think I have a bad part! Or *New* Tech Support Express” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.