Havoc_aXe Posted January 21, 2006 Share Posted January 21, 2006 :confused: I have a MSI K8TM-ILSR motherboard and I have just purchased the TWINX1024-3200C2PT Corsair Memory. After installation of the RAM I noticed that my bios set the memory clock to 333MHz. I have tried everything I can think of to fix this problem with no resolve. I took the memory out and installed one stick at a time and the clock runs at 400MHz with either of the sticks but not both. I was wandering if you could help me with this problem.:confused: Link to comment Share on other sites More sharing options...
Havoc_aXe Posted January 22, 2006 Author Share Posted January 22, 2006 :cool: I think I figured out my own problem. I beleive that it is a memory controller limitation as described in your forum. By the way you have a lot of excellent information here and it has done me a lot of good to read through. Thanks, Havoc_aXe:cool: Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 24, 2006 Corsair Employees Share Posted January 24, 2006 Not a problem that is what we are hear for. And if you have more than 2 slots you can try and move the modules to slots 1-3 or 2-3 amd manually set the memory frequncy to DDR400 but test with http://www.memtest.org to be sure its stable. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.