hott Posted January 16, 2006 Share Posted January 16, 2006 I tried everything, but everything else as default 3-3-3-8 is unstable. CAS Latency (tCL): 2 RAS to CAS Delay (tRCD): 3 Row Precharge (tRP): 3 Active to Precharge Delay (tRAS): 6 Voltage 2.75 Boots, but windows gives login failure, freezes or spontanous reboot. (within 10 secs). Tried in a DFI SLI nforce SLI and also Ultra configuration, same problem (freezes after 20 sec). 2.5-3-3-8, the same problem. Tried 1T or 2T, manual 200 Mhz, Auto or everything default and just 1 change. Most of the time i have to clear CMOS. My configuration (besides signature) : Areca 1220 and 3 extra Maxtor. I contacted my reseller in Holland, but they said that it is, in their opinion, not a defect. That I should fix this with Corsait directly. Link to comment Share on other sites More sharing options...
hott Posted January 16, 2006 Author Share Posted January 16, 2006 http://tweakers.net/gallery/89700/sys My specs. Link to comment Share on other sites More sharing options...
armandocroce Posted February 6, 2006 Share Posted February 6, 2006 Hi, even for me, anything else than default settings is unstable. How did you solve it? Regards, armando Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.