Jump to content
Corsair Community

Settings for DFI nF4 SLI-DR Expert and 4x Corsair TwinX 3200LL V1.2 ?


Recommended Posts

Hello RamGuy (everyone),


I have an DFI nF4 SLI-DR Expert Mainboard equipped with 4x Corsair TwinX 3200LL V1.2 Modules. Sometimes my Windows randomly freeze.

Can anyone here provide me stable settings for my Mainboard ?




Link to comment
Share on other sites

I have the dfi-sli dr mobo, but with 2 sticks of of what you have currenty. if I have the vdimm below 2.8 ill get bsod relating to mem every now and then. If I bump it to 2.8 vdimm and no more bsod for me. im running 250x10 at 1/1 2.5 3 3 7 1t


I still wish they would have a option to enable a -.03 volts. as running at 2.8 really shows it running at 2.84


hope this helps you out

Link to comment
Share on other sites

I would try Cas 2.5-3-3-7 and set the memory voltage to 2.8 Volts!




i tryed those settings. Everything seems to be fine first.

Now and then i still had a few frezes in some 3D Games (FEAR,COD2).

Today i installed Quake4. It wont run with those settings. It freezes at the beginning before the intro Videos are played.

If i set my DRAM Frquency to 333 in the Bios the games just runs fine.

Is there any chance to let my Memory run at 400 with stable settings ?

At 333 i have a lot of Performance loss :/




Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...