Jump to content
Corsair Community

2 x TwinX1024-3200XLPRO Memtest86+ Errors


Recommended Posts



I have a very similar problem to "Lady S" (http://www.houseofhelp.com/v2/showthread.php?t=34856) in that I get memory errors only after I load another set of TwinX1024-3200XLPRO. Each pair seams to work correctly under "Memtest86+" when only one pair is installed, but when I test with both pairs installed, I get over 500 errors. Could this be corrected by increasing the voltage to 2.85 like you suggested before? Also, I have "Spread Spectrum" off; should I turn it on? Additionally, memory timings are set in the BIOS for "SPD", however, I don't mind adjusting them in order to utilize my full 2GB worth of matched memory pairs, if that's what we need to do.


My system breakdown is as follows:


Motherboard: ASUS P4P800-E Deluxe

Processor: Intel P4 3.4GHz EE

Memory: 4 x Corsair (TWINX 1024) CMX512-3200XLPRO

Video Card: ATI All-In-Wonder 9800 Pro

Hard Drives: 2 x WD Raptor 74GB 10K RPM 8MB cache (RAID 0)

2 x DiamondMax 10 300GB 7K RPM 16MB cache (RAID 0)

Optical Drives: Plextor PX-716A DVD/CD/RW

Plextor PlexWriter 12/10/32 CD-RW

Power Supply: Ablecom PWS-024 400W

Case: SuperMicro SC760P4-400 Full tower chassis


Thank you,



Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...